If you still have them you should consider uploading them to archive.org, or similar services, so you can more easily recover them in similar cases

It’s sad, but currently inevitable, for fediverse servers to disappear with everything they hold

Hangs, reboots or does it turn off? Depending on that it could be a plethora of things.

Do you get any error prompts? Any red alerts when restarting?

Did you check that the monitor works steadily on another system/OS?

Did you try another DE, even on a live usb?

Is the HDD/SSD healthy?

Are all the fans working? Is it the thermal protection?

Is the PSU healthy and or the power connection damaged?

Does your system have a centralized logging like journalctl or can you reach the single log files to check and add more information?

It could literally be anything, even aliens.

In Star Trek? Around the aftermath of the Eugenics wars

It’s probably a problem with the UEFI, the windows info got overwritten, and you can probably fix this with efibootmgr

It happened to me too, but unfortunately it was some years ago and I’m not at home to find the related notes that I took. I remember there was a windows utility to rewrite the boot loader. But probably in your case the boot partition is still okay, just the UEFI entry got overwritten and you just have to add it back manually.

Check the troubleshooting section of the wiki page to have a tip on the windows booting location

“Sailor moon eating a crow, while wearing a crow, while riding a crow, and is also a crow.”

That’s a murder for sure

I didn’t know about this project, so I took a quick look around.

I didn’t see any mention of Telemetry or Metrics, but I assume they can use this:

After starting Tails and connecting to Tor, Tails Upgrader automatically checks if upgrades are available and then proposes you to upgrade your USB stick. The upgrades are checked for and downloaded through Tor.

https://tails.net/doc/upgrade/index.en.html#automatic

Still, I just gave this a few minutes, so there could be more.

So, I can’t install aur packages via pacman?

Nope, you have to do it manually or using an helper that abstracts the manual work away.

AUR packages, or to be more precise the PKGBUILD files, are recipes to compile or download stuff outside from the official repositories, manage their deps and installing them on the system.

You should always only run PKGBUILD files that you trust, they can do basically anything on your system. Checking the comments of the package in the aur repo is a good practice too.

Also Are you quoting certain nExT gEn gAmE guy?

…maybe

Also in wiki they didn’t mention anything about OpenSSL?

Sorry, that was my bad, I wrote OpenSSL instead of openvpn. That one is probably needed too, but you should not have to pull it manually.

Generally speaking the ArchWiki is one of the best, more structured and well maintained source of information about Linux things even for other distros, but it can too be outdated, so you should always check if the info is valid. In this case it seems so.

In theory you should be able to just install proton-vpn-gtk-app using one of the many AUR helpers and it should Just Work™. Paru and yay are the most commonly used ones - as far as I know - and they wrap around pacman too, so you can use them to do everything packages related. Usually Arch related distro use one of them, for example EndeavourOS have yay already installed.

At worst when you try to start protonvpn the GUI will not appear or immediately crash: if that happens, usually, you can try and run the program from the Shell and see what kind of error it returns and work your way from there. Checking if the deps listed in the wiki are installed is always a great first step.

Reading rorschac’s comment I assume both OpenSSL and wireguard are already installed on CachyOS, or anyway pulled by the aur package.

If you want to make sure you can install them explicitly before protonvpn:

paru openvpn wireguard-tools

or using yay or the vanilla pacman -Syu --needed openvpn wireguard-tools (it will sync and update the system too) or how it is suggested for CachyOS to install packages. I repeat I’ve no direct experience with that one.

If you are scared to mess things up you can always spin up a VM with CachyOS and try to install it inside that. If it all works you can then do the same on your main OS.

As a general advice, only run in your shell commands that you are sure about.

I can attest that this AUR package, which is the one indicated in the wiki, works fine on EndeavourOS, but I had to add the gnome key wallet (IIRC) to handle the VPN keys. I think that was fixed.

I have no experience with CachyOS.

The more images I see and the more impressive Flux seems.

People could already make it run on 16GB cards, let’s hope it can get squeezed down even more.

I wish they used them all, especially XDG_CACHE_HOME which can become pretty big pretty fast.

disable this system security feature temporarily,

This should be - if I’m not mistaken - possible using the pip env var I posted about earlier, like this:

PIP_BREAK_SYSTEM_PACKAGES=1 sudo apt install howdy

Or exporting it for the current shell, before running the installation

export PIP_BREAK_SYSTEM_PACKAGES=1

But I personally highly discourage it, because - AFAIK - if it even works it will mess up the deps in your system.

I’m no python expert but reading around it seems your only real solution is using a virtual environment, through pipx or venv as you already had found out, or using the

--break-system-packages

* Allow pip to modify an EXTERNALLY-MANAGED Python installation

  (environment variable: `PIP_BREAK_SYSTEM_PACKAGES`)

pip flag which, as the name suggest, should be avoided.

EDIT: After rereading I got your problem better and I was trying to read the source for Howdy to see how to do it, so far no luck.

It’s an error with a dependency written in Rust, the workaround is to use an older toolchain (1.72), it is fixed in the newer code of tokenizers, but probably it is not updated in AUTOMATIC1111 yet: you should check their bug tracker

To have more info you can read this issue: Link

Considering you are not using the Flatpak anymore it is, indeed, strange. The only reasons I can think of are: your network manager is using the wrong network interface to route your traffic ( if you go on an ip checking site like for example ipinfo do you see yours or the VPN’s IP?) or that you have WebRTC enabled and the broadcaster is getting your real ip through that.

For the first case it can get pretty complicated, but it is probably an error during the installation of the VPN app or you set up multiple network managers and it gets confused on which one to configure. You should also enable the Advanced Kill Switch in the configuration.

For the second case you could try adding something like the Disable WebRTC add-on for firefox and check if it works. Remember to enable it for Private Windows too.

The last thing I can think of is that you allowed the broadcaster to get your real geolocation (in firefox it should be a small icon on the left of the address bar), or you are leaking some kind of information somewhere: there are a bunch of site that check for ip leak, but I don’t know if that goes too deep for you.
If you want to check anyway the first two results from DDG are browserleaks and ipleak. Mullvad offered one too but it is currently down.

EDIT: If you enable the Advanced Kill Switch, and the app is working correctly, internet will not work while you are not connected to a VPN server or until you disable the switch again, so pay attention to that.

Probably when you installed the second linux you overwrote the boot loader instead of adding a new UEFI entry point.

But I’ve never had a Mac, so take this with a pinch of salt, and honestly considering things can change based on what, in which order, and how you installed things… it could be something else.

Unfortunately, in general, people tend to just read, vote, and then forget about it without checking back: that’s why I always try to add some source or ways to verify what I post.

And - in this specific case - probably some people just like LTT, I assume.

Linus is an investor in the framework company: Source on the framework forums that links to the video on youtube

Currently they have direct shipping for some EU’s members (Germany, France, Ireland, Netherlands, Austria, Italy, Spain, Belgium) Source

And I think the shipment costs are currently already in the price for the laptop Source

But I’ve not bought one so I don’t have direct experience