TrenchcoatFullOfBats

Thank you! It was a fair amount of work, so that’s nice to hear.

“I wrote an email to Google Gryzzl to say, ‘you have access to my computer, is that right?’”, he added.

Later that day

Sure! Here are the cable organizers and “magazine”.

The magazine is for a gridfinity setup but I modified it to work with my printed Skadis panels, which are in turn a heavily modified version of this openscad model with a custom “wedge” mount to lock the panel tighter onto the wedges as more weight is added. My customizations aren’t shared anywhere, but if you’re interested, I’ll put them up on printables.

No drawers in the server closet, so 3D printer to the rescue:

Apparently one of the people on the Rebble board is working on the project:

Some people are working on this for my new company, Core Devices, including Joshua (also one of the Rebble board members), Gerard (firmware) and crc32 (Cobble). We’ll be joined soon by Steve Penna, my OG Pebble colleague who helped build the Pebble Android app.

Heiko, the brilliant mind behind much of Pebble’s aesthetic and engineering beauty, is helping as technical advisor, along with my first colleague at Pebble, Andrew Witte and another key Pebble design leader, Mark Solomon. Others are helping via the Rebble community Discord.

Source

This is a good point, the client is an important consideration. My setup is the similar, with Jellyfin running in docker in an Ubuntu Proxmox VM (host system CPU is an i7-6700t), but the client is an Nvidia Shield Pro, which so far has been able to handle everything Jellyfin throws at it, with the exception of AV1.

deleted by creator

How about a dreamatorium in a linen closet?

T-80: Lasted for 34 minutes before succumbing to crippling depression and taking itself permanently offline

Disk space is definitely an issue, but I think I’ve got my single user instance dialed in on a 2 vcpu/4gb/30GB RAM Hetzner VPS; a cron job that runs at the first of every month deletes pictrs files over 30 days old. Currently at 74%.

A lot of bean memes died the day that job first ran.

Yeah, the tablet runs Fully Kiosk and I tried the same thing with the battery percentage thing and ran into the same issue, so I just simplified and made the automation time-based.

The tablet also likes to freeze a few times a day, so I also created an automation that toggles the smart plug power whenever HA loses connection to the tablet for more than 5 seconds, then toggles back to the original state at the start of the automation, which corrects the problem. Until the next time. But hey! It was only $60, so it’s fine.

That’s a nice setup. I am weirdly jealous of the sliding shelf. The CS350B is very nice as well.

Heat, then suction?

On a related note, I solved the battery issue with my wall mounted Fire tablet (for an HA dashboard) by connecting the power supply to a smart plug and setting up an automation to only give it the juice for about 3 hours per day, spread throughout the day

From top to bottom:

• Patch panel (with artisinal, handmade cables)
• TP-Link managed switch Shelf 1:
• PFSense 4 port firewall
• Lenovo m910q w/Proxmox (cluster node 1) running 2 VMs for docker hosting: Ubuntu for media stuff (arrs, navidrome, jellyfin, calibre, calibre-web, tubesync, syncthing) and Debian for other stuff (paperless-ngx, vikunja, vscodium, redlib, x-pipe webtop, fasten health, linkwarden, alexandrite), 1 Win 10 VM for the very few times I need to use windows, some Red Hat Academy student and instructor RHEL 9 VMs, and an OPNsense VM for testing Shelf 2:
• HP Elitedesk G5 800 SFF w/Proxmox (cluster node 2) with an Nvidia GT 730 passed through to a Debian VM used primarily as a remote desktop via ThinLinc, but also runs a few docker containers (stirling pdf, willow application server, fileflows)
• Shuttle DH110 w/Proxmox (cluster node 3) with 1 VM running Home Assistant OS with an NVME Coral TPU passed through as well as a zooz 800 long range zwave coordinator (the zigbee coordinator is ethernet and in a different room) and two LXCs with grafana and prometheus courtesy of tteck (RIP) Shelf 3:
• WIP Fractal R5 server to replace the ancient Ubuntu file server to the left (outside the rack, sitting on the box of ethernet cable) that is primarily the home of my media drives (3 12 TB Ironwolf drives) and was my first homelab server. The new box will have a Tesla p4 and RX 580 GTX, i7-8700T and 64GB RAM in addition to the drives from the old server. I’ll be converting the Ubuntu drive from the old server into an image and will use it to create a Proxmox VM on the new server, with the same drives passed through. Bottom:
• 2 Cyberpower CP1000 UPS with upgraded LiFePO4 batteries. The one on the left is only for servers and only exists to give the servers time to shut down cleanly when the power goes out. The one on the right is only for network devices (firewall, switch and the Ruckus R500 out of shot mounted higher in the closet)

I will definitely add you to the list. And yeah, an older family member living far away who fell is the reason we started this project. We wanted to be able keep an eye on her (and allow other family members to do the same), but there wasn’t anything available that met our requirements, either price or privacy-wise, so we built something and preconfigured it, including a Lubuntu VM with a Mesh Central agent installed that we could use for remote access and troubleshooting for the entire system. This has been super useful, and is the basis of our support model.

If a support package is purchased, we’ll ship the device with a support VM installed that is shut down at all times EXCEPT when a specific (included) USB key is inserted into a specific USB port (the only USB-C port, located on the front of the device). This starts the support VM, at which point we would be able to remote in to check the system and fix any issues. The VM shuts down again when the USB key is removed, or after a set period of time, like an hour. This will allow us to ship the device and/or cameras to an older or non-tech savvy person and WE can provide them with support so YOU don’t have to.

Will do! And thanks, that means a lot!

Done! Thanks for the interest!

Good question! starlight/night color cameras generally just have larger CMOS sensors to capture more light, OR they integrate an LED “spotlight” into the camera housing to increase the amount of light available to the sensor, and if that’s not enough, the IR will kick in. Sometimes the sensor IS actually larger, and sometimes it isn’t.

We’ve standardized on Amcrest cameras, and while we haven’t actually tested it, Amcrest does have a “night color” outdoor turret camera that appears to support both ONVIF and RTSP, for the same price as the “regular” turret camera. The model number is IP5M-T1277EW-AI.

If it’s like other similar Amcrest cameras, you can likely disable the AI stuff via the built-in configuration, especially if you have Frigate doing that for you.

Personally, I prefer a solution that uses a regular IP camera and a separate smart light (or regular light on a smart plug) that kicks on when motion or a tagged object is detected, which will then cause the camera to switch from black and white IR to color, usually in about a second. The separate light will give you a much better image than anything you’ll get from a built-in LED or slightly larger sensor, in my opinion.

Home Assistant and Frigate make it easy to set up this kind of automation, and the “regular” Amcrest cameras have pretty good IR, so Frigate has no problem running detection on those feeds. The automation is basically “if a cat is detected on the garage camera, turn on the garage lights for x minutes”.

Hope that helps!

We are not quite ready to roll everything out yet -it’ll probably be another 2 or 3 months, but I’d be happy to shoot you a message when we go live if you’d like.

Thanks! Since our entire software stack is open source, and since open source software has been so transformative for our lives in general, it’s a priority for us to give back where we can.

The profit will come from labor involved in assembling the hardware, pre-configuring the software for each customer, and providing personalized support via a set of subscription support plans at various prices, including individual one-offs.

We’ll be dedicating a set amount of time every day to read support forums for the software we use (and places like Lemmy) and provide help where we can.