Updated my comment to reflect this. Thanks for clearing out the confusion.
Updated my comment to reflect this. Thanks for clearing out the confusion.
There is a standard connector which existed before big screens landed in cars, the OBD2 connector. Dongles are cheap and you can read the output from your phone or computer. Some dongles support bluetooth. The connector is mandated in some markets and I guess that makes it less interesting to add a redundant interface inside of the car. It’s fun to try if you’re interested. Manufacturers can extend the error codes IIRC.
Tesla has a service mode on the display through which you can scan the car for faults, run a battery test, … It is password protected but the password is publicly available.
This is a great overview. Some extra notes:
Linux will be sluggish running “live” off the usb stick. Do poke around but know it will be faster running from the laptop’s SSD.
For a way to install onto a USB stick, check Balena Etcher. I guess there are better tools out there but this worked for me every time I tried it, seems to work on windows too, and I found it intuitive.
FP5 using e/OS here showing the same artifacts.
Many lights flicker around mains frequency (can be half or double IIRC). Incadecent lights don’t respond very quickly and so the flickering is a lot less noticable.
Cheap LED lights are mains powered and flicker similar to cheap fluorescent bulbs. With a good rectifier and transformer the flicker should be way above visible frequency. LED dimming on cheaper constructions works by phase cutting which creates an even harsher on/off cycle and doesn’t feel that great. I don’t know how to know it was produced well and “expensive” doesn’t do the trick it seems.
Cheaper LED lights also don’t emit the full visible spectrum of light to produce white. The light itself looks correct but when it bounces off the wall (or other objects) the color of that object doesn’t look right. That’s why you may experience a tone shift when taking pictures under an LED light (ie: you could look more green).
I don’t know how to buy this right but the color can be bettered by buying CR95 lamps or similar. This rating identifies the spectrum of color.
For the flickering I don’t know of a rating but when you DIY led strips with a dimmer you can choose a good power source and a dimmer which acts at a high enough frequency such as 1khz to mitigate the flickering effect.
I run e/OS on a FP5. I ran e/OS on a Essential PH-1 before and going back to a phone with Google installed just didn’t sit right with me. I did not feel like I could trust the device even after trying to toggle as much of the creepy spying off. As if there’s still someone probably looking over your shoulder because you configured something wrong.
It is not perfect, but it is easy to use and full-featured. All regular apps feel great and battery life is good. I still use specific Google services (such as the calendar for work) but no specific Google apps. I guess Maps is the biggest challenge now but alternatives are good enough to get around with.
You can run Android apps. Not sure about payed Android apps. I try to install FOSS apps through the integrated f-droid store if they’re available there. Installing app store apps sometimes fails because Google blocked the installer. I could install everything so far when needed (including banking apps and specific apps for the vacuum cleaner and such). Sometimes the Android app store apps don’t update for a while and I don’t notice.
I don’t use Murena’s services but self-host Nextcloud. Based on the information they send I think they’re doing a great job for their size.
I flashed the FP5 myself with a beta of e/OS when it was just out because the other phone was broken and (again) I did not feel right with the spying demon in my pocket with native Android. You could flash your device too.
It’s comfortable on this side. If you have further specific questions, shoot.
Which prompt, parameters and model was this generated with?
They are also very Chinese and closed and without a proper Google Play store. I used a HiSense 5c pro as daily phone (hope I have the name right).
Bought it because I’m quite interested in eink. It is interesting to use and it is really usable. It is ok to read text on. I was not able to root it and was thus a bit locked in. The lock screen couldn’t be adapted to my liking and I did not fully trust in what spying it might be doing (like Google location tracking and such).
I dropped my FairPhone 5 from a bicycle on unwelcoming pavement at good speed. Broke the camera glasses, the screen protector, the carry case and the back cover. It looked positively destroyed and my first thought was “yay, it’s repairable”. Repairing was easy enough and aside from some war wounds on the side of the case (scratches) it’s as good as new. I’m glad I got this phone.
Aside from being repairable, I also appreciate the e/OS support.
I’m also waiting for this to move some 500 repositories from GitHub to a realistic federated alternative. I follow up from a distance but don’t see much movement on ForgeFed for ForgeJo. Did I miss something?
Battery temperature management seems to be a key limiting factor.
At least a few years ago, and likely still, the reasons and conditions under which the barrier layers in the battery degrade were not super well understood. Heat seems to be a key contributing factor and charging a battery quickly warms up the battery and I suppose not fully evenly within a cell. Not knowing the complete extent of this makes the early LEAF’s lack of actively cooled battery a reasonable choice. Before that, the batteries of earliest Prius cars held up way longer than expected.
Like with a phone: heat and cold is not super awesome for the battery. It seems heat is especially bad for longevity.
I don’t think Xerox invented the computer mouse. It was first drawn out by Douglass Engelbart and presented to the public in the 1968 presentation “Augmenting the Human Intellect” (you can watch it on the present day, it was recorded).
It was my understanding (which I did not verify) that this was picked up by Xerox and others and that windowing systems evolved from there on with Xerox leading towards Desktop Publishing.
This must be from another timeline. Sorry for the inconvenience, please skip.
User focused applications running on my own internet accessible infrastructure fully based on open standards and interoperable with the Fediverse… Yes please
I’m looking forward to play with this.
To be honest, I didn’t know by heart what we stated exactly. It says “Open source”. When we ask we may well say “like a GitHub handle”.
For people without much experience it can all be a bit daunting. They’ll know about GitHub and it helps them identify what we’re hoping to see. By now I expect links to open source work in a CV due to the nature of our company but it’s not a requirement.
It’s a balancing act in getting the right hints in a vacancy for people in the know and providing enough info for people who don’t know yet.
GitHub wasn’t all that bad years ago and it’s easy seeing this find their way in HR forms and taking as long to be removed again. I certainly wouldn’t shun entering a CodeBerg/GitLab/selfhosted url in a form where I should enter a GitHub handle.
We also ask for a GitHub handle but when one supplies Codeberg or GitLab it’s seen as very positive. Might not be the case for standard HR though.
Mercedes’s stars have been on springs for decades indeed. You can easily push them over (but make sure you put it back nicely). I think Rolls Royce’s Spirit of Ecstasy pops back into the hood but I don’t know how that works on impact.
Nice script. What is the reason to toggle the brightness?
Set up a Matrix bridge and promote it too. You can’t force a community but you can inform and give choice.
The writing style and positive fighting spirit of https://lemmy.world/comment/3597938 is great. Would read a book of this person.
I have since tried to browse Lemmy on it a few times. The lack of emitted light and terrible color rendition make it more boring. I guess that’s the point, a more boring device. Pictures are a problem due to dithering and bad color rendition.